Series 60 Core Block, Fiddle, Cleat RF64520
Ronstan RF64520 kogelgelagerd Core vioolblok 60mm met klem.
In stock
SKU
RF64520
€ 263,95
€ 263,95
Ronstan Series 60 Core Block, Fiddle, Cleat
De Ronstan Core blokken zijn voorzien van het unieke "dual stage bearing system" wat betekent dat het blok bij extreem hoge belastingen overschakelt van de kogellagering naar een hoog gepolijst glijlager. Hierdoor worden de ballen ontlast waardoor de werkbelasting van dit blok extreem hoog is en het blok minimale weerstand heeft bij zowel lage als hoge belastingen.
De blokken zijn gemaakt uit aluminium waardoor ze zeer solide zijn. De RVS harp kan swivelen of kan worden geblokkeerd. De blokken zijn gemaakt van hoogwaardig aluminium, rvs en bronzen onderdelen. De as van het blok kan worden gebruikt als hondsvot en de hoek van de arm met klem is instelbaar.
Lijndiameter: 12mm schijfdiameter: 60mm+30mm breekbelasting: 2000kg werkbelasting: 1000kg
Schijf Ø 60 + 30 mm
Gewicht 490 g
FEATURES
• Class leading performance and sleek, contemporary styling
• Excellent dynamic and high static load performance
• Less than half the friction of the nearest competitor
• Adjustable cleating angle
• Fitted with high performance C-cleat and fairlead for secure and easy cleating
• Integrated becket through the hub of the lower sheave
• ***Line load throught cleat not to exceed 175kg (385lb)
PRODUCT INFORMATION
Core Blocks® are a true all round solution. A tuned 2-stage bearing system provides excellent performance across the full working load range with an integrated thrust bearing feature and the resilience to handle high dynamic or static loads. Acetal sheave, alloy cheeks and stainless fixings complete the durable package. For reliability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.
Universal Bearing -
Dynamic and high static load performance
The Ronstan Universal Bearing incorporates our proven 2-stage bearing system
Stage 1 - Under moderate loads, Acetal ball bearings ensure minimum friction.
Stage 2 - Under heavy loads, where deformation of ball bearings alone would result in increased friction, a sliding Acetal bearing on a polished stainless steel race takes over, maintaining low friction performance.
Additionally the ball bearings are configured to act as a thrust bearing between the sheave and cheeks, preventing the sheave from rubbing on the cheeks and causing friction when the line lead in and out of the block isn’t perfect. Particularly important for cheek blocks.
Alloy cheek plates
Block cheeks are manufactured from the highest quality alloy for maximum strength. Material optimisation and the cut-away design minimises Weight and allows easy fresh water rinsing of salt and debris from the bearings. Cheek design has been further styled with flaring at the block throat and reduced gap between the cheek and sheave, minimising rope wear.
APPLICATIONS
• Ideal for mainsheet, halyard and spinnaker sheet applications on boats to 11m (36ft).
• Various control line applications on larger yachts.
• Alloy sheave models are available for use with wire.
MATERIALS
• Sheaves: U.V. stabilised Acetal
• Cheek plates & cleat arms: Aluminium alloy
• Ball Bearings: High compression strength carbon black Acetal
• Shackle, post & hub: Grade 316 stainless steel
• Padeye & snap shackle: Grade 15-5PH stainless steel
• Snap shackle: Grade 15-5PH investment cast stainless steel
• Cleat: Fibre reinforced composite
• Cleat: Fibre reinforced composite
De Ronstan Core blokken zijn voorzien van het unieke "dual stage bearing system" wat betekent dat het blok bij extreem hoge belastingen overschakelt van de kogellagering naar een hoog gepolijst glijlager. Hierdoor worden de ballen ontlast waardoor de werkbelasting van dit blok extreem hoog is en het blok minimale weerstand heeft bij zowel lage als hoge belastingen.
De blokken zijn gemaakt uit aluminium waardoor ze zeer solide zijn. De RVS harp kan swivelen of kan worden geblokkeerd. De blokken zijn gemaakt van hoogwaardig aluminium, rvs en bronzen onderdelen. De as van het blok kan worden gebruikt als hondsvot en de hoek van de arm met klem is instelbaar.
Lijndiameter: 12mm schijfdiameter: 60mm+30mm breekbelasting: 2000kg werkbelasting: 1000kg
Schijf Ø 60 + 30 mm
Gewicht 490 g
FEATURES
• Class leading performance and sleek, contemporary styling
• Excellent dynamic and high static load performance
• Less than half the friction of the nearest competitor
• Adjustable cleating angle
• Fitted with high performance C-cleat and fairlead for secure and easy cleating
• Integrated becket through the hub of the lower sheave
• ***Line load throught cleat not to exceed 175kg (385lb)
PRODUCT INFORMATION
Core Blocks® are a true all round solution. A tuned 2-stage bearing system provides excellent performance across the full working load range with an integrated thrust bearing feature and the resilience to handle high dynamic or static loads. Acetal sheave, alloy cheeks and stainless fixings complete the durable package. For reliability and a long service life, these blocks are the right choice for sheets, halyards and control line applications for cruising and racing.
Universal Bearing -
Dynamic and high static load performance
The Ronstan Universal Bearing incorporates our proven 2-stage bearing system
Stage 1 - Under moderate loads, Acetal ball bearings ensure minimum friction.
Stage 2 - Under heavy loads, where deformation of ball bearings alone would result in increased friction, a sliding Acetal bearing on a polished stainless steel race takes over, maintaining low friction performance.
Additionally the ball bearings are configured to act as a thrust bearing between the sheave and cheeks, preventing the sheave from rubbing on the cheeks and causing friction when the line lead in and out of the block isn’t perfect. Particularly important for cheek blocks.
Alloy cheek plates
Block cheeks are manufactured from the highest quality alloy for maximum strength. Material optimisation and the cut-away design minimises Weight and allows easy fresh water rinsing of salt and debris from the bearings. Cheek design has been further styled with flaring at the block throat and reduced gap between the cheek and sheave, minimising rope wear.
APPLICATIONS
• Ideal for mainsheet, halyard and spinnaker sheet applications on boats to 11m (36ft).
• Various control line applications on larger yachts.
• Alloy sheave models are available for use with wire.
MATERIALS
• Sheaves: U.V. stabilised Acetal
• Cheek plates & cleat arms: Aluminium alloy
• Ball Bearings: High compression strength carbon black Acetal
• Shackle, post & hub: Grade 316 stainless steel
• Padeye & snap shackle: Grade 15-5PH stainless steel
• Snap shackle: Grade 15-5PH investment cast stainless steel
• Cleat: Fibre reinforced composite
• Cleat: Fibre reinforced composite
| Serie | Series 60 Core |
|---|---|
| Type blok | Viool |
| Aantal schijven | 2 |
| Lager | Glijlager |
| Max lijndikte | 12 mm |
| Wartel | Ja |
| Klem | Ja |
| Ratel | Nee |
| Breeksterkte (kg) | 500 |
| Veilige belasting (kg) | 250 |
